Rectangular detector

A RectangularDetector object in BornAgain is used to represent a two dimensional neutron/x-ray detector. The following sections provide details on this type of detector:

General description

A RectangularDetector has a plane rectangular shape, a total given width and height and a given amount of pixels. The detector plane can placed in an arbitrary position and orientation with respect to the sample position.

Rectangular detector definition

BornAgain’s RectangularDetector is initialized using its constructor

RectangularDetector(nxbins, width, nybins, height)
"""
Constructs rectangular planar detector

nxbins : Number of bins (pixels) in x-direction
width  : Width of the detector in mm along x-direction
nybins : Number of bins (pixels) in y-direction
height : Height of the detector in mm along y-direction
"""

The local detector coordinate system is defined in such a way, that its origin coincides with the lower left corner of the rectangle. For example, the following code snippet will create a rectangular detector with a total number of pixels equal to $10 \cdot 9=90$ and with a pixel size equal to $200 mm \cdot 180 mm =36\cdot 10^3 mm^2$.

detector = RectangularDetector(10, 200.0, 9, 180.0)

Here, the vertical and horizontal lines denote the bin boundaries while the blue markers show the bin centers. During a simulation, the bin intensity will be calculated for values of $\varphi_f$ and $\alpha_f$ corresponding to the bin centers and then normalized to the bin area.

Positioning the rectangular detector

The position and the orientation of the detector can be defined in a generic way using the following parameters:

  • the vector n, given in the sample coordinate system, which is the normal to the detector plane and has a length equal to the sample-detector distance
  • the coordinate of the point (u0, v0) of intersection of the normal vector n and the detector plane, expressed in local detector coordinates
  • the detector axis direction vector u which defines the orientation of the detector axes with respect to the sample coordinate system

In the plot above, the detector is inclined towards the sample by an angle of 20 degrees.

The position is defined using the RectangularDetector::setPosition method as follows

setPosition(normal, u0, v0, direction = R3(0, -1, 0))
"""
Sets position of rectangular detector
normal   : Vector in sample coordinate system, normal to the detector plane,
           pointing from the sample origin to the detector plane
u0       : x-coordinate of point of intersection of normal vector and detector plane,
           expressed in local detector coordinates
v0       : y-coordinate of point of intersection of normal vector and detector plane,
           expressed in local detector coordinates
direction: direction of detector u-axis with respect to the sample coordinate system
"""

Note that the direction vector u is set by default to (0.0, -1.0, 0.0) which corresponds to the detector u-axis pointing to the right, as shown in the plot above (green arrow on the detector plane). This value should not be changed, unless the user has to deal with a rotation of the detector around the normal vector n.

In the following, we will show how to set the detector’s parameters for the three most common cases in GISAS experimental setups:

  • the detector plane is perpendicular to the sample plane
  • the detector plane is perpendicular to the direct beam
  • the detector plane is perpendicular to the reflected beam

The detector is perpendicular to the sample plane

In this case the normal vector n coincides with the x-axis of the sample coordinate system and the length of the vector is equal to the detector distance. The detector’s local coordinates (u0, v0) denote the point where the sample x-axis crosses the detector plane.

The following code demonstrates the creation of the detector shown in the plot. Note that the values of the parameters are given only as an example and do not reflect the relative proportions in the plot.

nxbins, nybins = 10, 9
width, height = 200.0, 180.0
distance = 2000.0
u0, v0 = 100.0, 20.0

detector = RectangularDetector(nxbins, width, nybins, height)
detector.setPosition(R3(distance, 0.0, 0.0), u0, v0)

simulation = ScatteringSimulation()
simulation.setDetector(detector)

The convenience method RectangularDetector::setPerpendicularToSampleX can be used to achieve the same setup:

detector = RectangularDetector(nxbins, width, nybins, height)
detector.setPerpendicularToSampleX(distance, u0, v0)

The detector is perpendicular to the direct beam

In this case the normal vector n coincides with the beam direction. The length of the vector is equal to the sample-detector distance. The detector local coordinates (u0, v0) again denote the point where the direct beam hits the detector plane.

The normal vector n can be easily calculated from the beam inclination angle $\alpha_i$.

width, height = 200.0, 180.0
distance = 2000.0
u0, v0 = 100.0, 10.0
alpha_i = 0.2*deg

detector = RectangularDetector(nxbins, width, nybins, height)
normal = R3(distance*cos(alpha_i), 0.0, -1.0*distance*sin(alpha_i)))
detector.setPosition(normal, u0, v0)

simulation = ScatteringSimulation()
simulation.setDetector(detector)

The convenience method RectangularDetector::setPerpendicularToDirectBeam can be used to simplify this setup:

detector = RectangularDetector(nxbins, width, nybins, height)
detector.setPerpendicularToDirectBeam(distance, u0, v0)

In this case, the ScatteringSimulation will calculate the normal vector n during runtime, depending from the beam angle settings.

The detector is perpendicular to the reflected beam

In this case the normal vector n coincides with the reflected beam direction. The length of the vector is equal to the sample-detector distance. The detector local coordinates (u0, v0) denote the point where the reflected beam hits the detector plane.

The normal vector n can be easily calculated from the beam inclination angle $\alpha_i$.

distance = 2000.0
u0, v0 = 100.0, 60.0
alpha_i = 0.2*deg

detector = RectangularDetector(nxbins, width, nybins, height)
normal = R3(distance*cos(alpha_i), 0.0, distance*sin(alpha_i)))
detector.setPosition(normal, u0, v0)

simulation = ScatteringSimulation()
simulation.setDetector(detector)

The convenience method RectangularDetector::setPerpendicularToReflectedBeam can be used to simplify this setup:

detector = RectangularDetector(nxbins, width, nybins, height)
detector.setPerpendicularToReflectedBeam(distance, u0, v0)

In this case, the ScatteringSimulation will calculate the normal vector n during runtime, depending on the beam angle settings.